MIM Smart Band Housing – SUS 304
Technical Specifications
Material: SUS 304
Dimensions: 35.12 × 15.00 × 35.67 mm
Weight: 47.87 g
Surface Finish : As-sintered
Hardness: ≥ HV150
Dimensional Tolerance: ±0.5% of nominal dimensions (as per 2D drawing)
Process: MIM (Metal Injection Molding)
Application: Smart Wearable Housing / Electronics Shell / Signal-compatible Casings
This housing was developed for smart wearable devices, produced using MIM for compact geometry, consistent strength, and signal transparency. The surface is as-sintered, offering a cost-effective solution without additional coating.
Mechanical Properties – SUS 304
Chemical Composition (%):
C 0.15–0.40 | Cr 12–14 | Si ≤ 1 | Mn ≤ 1 | P ≤ 0.04 | S ≤ 0.03 | Fe Balance
Mechanical Properties (As Sintered):
Density: ≥ 7.6 g/cm³
Yield Strength (RP₀.₂): ≥ 210 MPa
Ultimate Tensile Strength: ≥ 520 MPa
Elongation: ≥ 45%
Hardness: ≥ HV150
Manufacturing Process Overview
This compact housing component is produced via MIM without secondary finishing. Its organic shape and curved profile are molded with precision and minimal parting line disruption.
Injection Molding → Debinding → Sintering → Inspection
Applications
- Smart Band Shells
- Wearable Device Casings
- Consumer Electronics Housings
- Signal-Compatible Stainless Covers
Have a similar project in mind?
This part was custom made based on client drawings.
Send us your file and we’ll check manufacturability and offer a quote
Link copied!